Interfacing Triple-Axis Accelerometer with AtMega16

Requirements

1. AtMega 16 IC /development board
2. 2. 3-Axis accelerometer
3. 3. LCD screen 16X2 (for displaying X, Y and Z data)

Description

This project makes use of three out of eight ADCs present in AtMega16 IC to display the corresponding digital data of X, Y and Z outputs of an accelerometer on 16X2  LCD.

Accelerometer

First let’s talk about the Accelerometer IC; here I have used ADXL-335 which is a 3-axis accelerometer module. 

Fig. 1: Image of ADXL335 Accelerometer Module

It’s very easy to deal with such kind of modules as they just need the VCC and GND supply to get started, rest is its job to provide us the analog data. These modules work on simple concept like that of force acting on an object at inclined plane. It deals with the Mg(sin ?) and Mg(cos ?) part of the force and  determines the angle  for further calculations. Now it also notices the change in force from which acceleration will be calculated.

 

These accelerometers do not respond to linear movements, they respond to accelerated motions at very small scale.

 

Looking at the above picture you’ll notice that there is an ST pin which deals with the value of ‘g’ (accelerations due to gravity) to be taken while calculating the result. Check out its data sheet for more information. It will also work on a default value if you do not connect this pin anywhere.

 

Analog/Digital Converter

Now talking about the ADCs present in AtMega 16; there are 8 independent ADCs which share their pins with that of PORTA. These ADCs are 10 bit which simply means that they can convert a given analog value into its corresponding 10 bit digital data.

ow before moving ahead we should first discuss what ADCs are. ADC stands for Analog to Digital Converter. We all know that microcontrollers work only on digital values, but what if we need to interact with analog devices or values. In such situations we need a device which can work as communicator between the analog part and digital part. ADCs (analog to digital converter) play the same game; they convert the analog values to digital one by some means of reference (Vref).

In AtMega16, pin 32 requires a reference voltage (normally given +5V) when working with ADCs. Also there’s one more term that needs to be introduced i.e.Resolution. In simple terms we can say it’s the precision or accuracy with which an ADC works. For a 10 bit ADC working with 5V Vref, its resolution comes out to be 4.88mV. This further means for every rise or fall of 4.88mV in the analog input the digital output will increase or decrease by one unit, respectively. Since it’s a 10 bit ADC the output data will vary from 0- 1023(2^10=1024) having 1024 different values.

 

Now coming back to this project, I have connected the X, Y and Z pins to ADC0-ADC2. These provide individual and independent analog values. I have also displayed their corresponding digital outcome on the LCD.

 

The LCD connections are as follows:

 

• DATA pins are connected to PB4-PB7, since its working in 4-bit mode

 

• RS, RW and ES pins are connected to PB0, 1, 2 respectively.

 

While watching the video part you will notice  that, the X, Y and Z values vary in between 300-500 only. This is because my Vref is set at 5V while 

 

the outputs from accelerometer remain between 1.6-1.9V.

 

In the coding part I have made use of three header files:

 

• <util/delay.h>                   for delay related functions

 

• <lcd.h>                            for LCD related functions

 

• <adc_lib.h>                     for ADC related functions

 

-  These header files are attached in this folder itself. 

.

Exclusive Digi-key Tools

Embedded computers

Hardware

Integrated Circuits

Connectors

Transducers

Circuit Protection

 Interfacing Triple-Axis Accelerometer with AtMega 16 - Program.rar

Circuit:

Code:

#include<avr/io.h>

#include <util/delay.h>

#include<adc_lib.h>

#include<lcd.h>

void main()

{

      int adc0;

      ADCinit();

      LCDinit();

      LCDclr();

      LCDcursorOFF();

      char ch[16];

      while(1)

      {

                  adc0=read_adc(0);                   //reading X axis data

                  sprintf(ch,"X: %d",adc0);     //converting int to char

                  LCDGotoXY(0,0);

                  LCDdisplay(ch);

                  LCDsendChar(' ');

                  adc0=read_adc(1);                   //reading Y axis data

                  sprintf(ch,"Y: %d",adc0);

                  LCDGotoXY(0,10);

                  LCDdisplay(ch);

                  LCDsendChar(' ');

                  adc0=read_adc(2);                   //reading Z axis data

                  sprintf(ch,"Z: %d",adc0);

                  LCDGotoXY(1,5);

                  LCDdisplay(ch);

                  LCDsendChar(' ');

                  _delay_ms(500);                     //a half-second delay

}

}